Flash instructions › Forums › General Questions and Comments › Flash instructions This topic has 1 reply, 1 voice, and was last updated 2 years, 2 months ago by Martyn. Viewing 1 reply thread Author Posts 2020-04-17 at 16:03 #9117 Reply AndyGuest Are there any instructions for flashing to the Arduino board? I can’t find any in the instructions or guides. I’d like to make sure things are clear before I make the dive. Thanks. 2020-04-18 at 01:18 #9118 Reply MartynKeymaster see https://www.dropcontroller.com/updating-the-firmware/ Author Posts Viewing 1 reply thread Reply To: Flash instructions Your information: Name (required): Mail (will not be published) (required): Website: Cancel Submit