- This topic has 6 replies, 1 voice, and was last updated 2 years, 7 months ago by Martyn.
2020-01-31 at 21:51 #6343MarkGuest
Any idea why version 22.214.171.124 will connect to my dropcontroller but the newest 2019.6.1.1 will not regardless of which DC version or BT Serial port I choose?
I should have mentioned that I will frequently get ‘no reply received from the drop controller – do you want to continue’? I hit yes and it carries on working for a few then it fails again.
2020-02-01 at 03:44 #6349MartynKeymaster
It sounds like you are using version 2 with an old Arduino sketch.
When I merged the apps I updated how the communication and acknowledgments worked. At the same time I updated the sketches.
Please update the Arduino sketch to dropControllerV2 Arduino Sketch 2019_V2_001
- This reply was modified 2 years, 7 months ago by Martyn.
2020-02-15 at 12:05 #6859norman dochertyGuest
Hi Martin,I built version 2 DropController 1 year 9 months ago, It’s been brilliant and running faultlessly since then.
I had to reset my phone a few days ago, put The new dropcontroller app. back on, paired it, but I can’t get it to connect via bluetooth. When I switch on, my HC06 is flashing as is my LED. When I try to connect, my HC06 light steadies but my LED keeps flashing and it will not connect. (I switched the Version button to 2) any ideas?
2020-02-15 at 13:51 #6862MartynGuest
did you update the sketch on the Arduino?
The new app uses a slightly different connection protocol so the sketch has to be updated.
2020-02-16 at 10:33 #6883norman dochertyGuest
NO,I’ll update it, I assume it’s 2019-V2-001?
2020-02-18 at 09:40 #6941norman dochertyGuest
Hi Martin, is the update i use 2019-v2-001?
2020-02-18 at 21:36 #6954MartynGuest
yes, that is the latest and the one that works with the new app.