Reply To: Odd trigger problem

Forums General Questions and Comments Odd trigger problem Reply To: Odd trigger problem


Ugh update, still no go. I swapped out the connectors for the flash and camera because I had a concern the ones I had were not getting a great connection on the bread board but all is good now with the pic below. As of right now the valves all fire in a sequence but I have no flash or shutter. I used an ohm meter to check my connections from the end of the cables back to the 4n25’s and everything tones out. Looked at the circuit over and over and am gonna walk away a while… lol

Any help would be greatly appreciated