Reply To: dropControllerPC ver 1.2.0.2

Forums General Questions and Comments dropControllerPC ver 1.2.0.2 Reply To: dropControllerPC ver 1.2.0.2

#2140
Dennis Dreyer
Guest

I have set up using the 101b.ino, and the debug version of the windows program. I first ran without the debug on, and after the double drops and shutter activation, the green “active” led stayed on, and the pop up warning that “No reply received from dropcontroller” was visible. Once the warning was cleared, the set delay of 5000 started counting down. At that point I pressed the stop button. A second attempt using the debug button on the settings screen resulted in the same sequence. The dropdata text file is shown below:
dropControllerPC: drop data File
Saved: 01/12/2017 1:26:28 PM
numDrops|2
numValves|1
Loop|YES
ButOrTimer|TIMER
WaitTime|5000
FT|0000|INC|000
CT|0500|INC|000
Drp-sol-start-i/d-val-size-i/d-val
Drop1| 1|0210|INC|000|0030|INC|000
Drop2| 1|0300|INC|000|0030|INC|000
Drop3| 1|0000|INC|000|0000|INC|000
Drop4| 1|0000|INC|000|0000|INC|000
Drop5| 1|0000|INC|000|0000|INC|000
Drop6| 1|0000|INC|000|0000|INC|000
Drop7| 1|0000|INC|000|0000|INC|000
Drop8| 1|0000|INC|000|0000|INC|000
Drop9| 1|0000|INC|000|0000|INC|000
<END>
I have included the bebug log and it is shown below:
Loop Page init performed
ACKTimerOff
SUB loopTimerOff()
SUB – updateDropData(). SEQ = 1
SUB – updateScreen()
RESET performed
wait user click START

START BTN clicked

SUB timerStart()
SUB – sendDropData()
ACKTimerOn

Inside Timer_ACK
ACKTimerOff
timeOutCount = 1
ACKTimerOn

Inside Timer_ACK
ACKTimerOff
timeOutCount = 2
ACKTimerOn

….
Inside Timer_ACK
ACKTimerOff
timeOutCount = 20
ACKTimerOn

Inside Timer_ACK
ACKTimerOff
timeOutCount = 21
No FTS rec’d from the dropController. Auto time out.
Completed

SUB – updateDropData(). SEQ = 2
SUB – updateScreen()
Screen updates done
SUB loopTimerOn()
ACKTimerOff
SUB loopTimerOff()
SUB – updateDropData(). SEQ = 1
SUB – updateScreen()
RESET performed
wait user click START

Advise if there is anything else I may try.