Reply To: Why 6 solenoid outputs

Forums General Questions and Comments Why 6 solenoid outputs Reply To: Why 6 solenoid outputs


I don’t have a photo I’m afraid. I have two different methods for multiply valves:

1 – Different length brackets. I use shorter valve brackets in the centre and longer on the outside. This means I can get the outer valves closer.

2 – Sometimes depth alignment can be an issue (front and back) not just left and right and in cases like this I use mini ball sockets.
Sorry no picture but the setup is longer bracket attached to the frame, ball socket attached to the bottom of the long bracket. Small bracket attached to the top of the ball socket. Valve connected to the small bracket. This gives full 360 degree movement.