- This topic has 7 replies, 2 voices, and was last updated 11 months, 4 weeks ago by Theo Bosters.
2019-06-07 at 03:51 #29122019-07-07 at 21:39 #3087CraigGuest
The first image doesn’t match the gerber file. Did Theo provide 2 files? Thanks!2019-07-08 at 03:15 #3088MartynGuest
the zip download are the files Theo sent to me. The image is taken from a flickr link Theo posted in another thread.2019-07-17 at 23:24 #3128PaoloGuest
Hi Theo, I tried to insert on JLC the “Gerber_BoardOutline.GKO” files but in the verification gives me an error.
I wanted to know if the PCBis is arrived and if they’re ok !!2019-07-18 at 01:14 #3129CraigGuest
Paolo, You have to submit the whole zip file to JLC PCB, not individual files. I would not recommend getting this board; at least not the one that is linked above. The file has issues with some of the component slots being the wrong orientation. I ordered 5 of these from JLC but as designed and manufactured the DC jack and the stereo 3.5mm TRS components won’t fit because of the issue. The DC/DC buck converter also doesn’t quite line up but without knowing exactly which one Theo designed for I don’t know if the issue is the board or the buck converter I got. Cheers!2019-07-19 at 10:30 #3133PaoloGuest
Ok, I immediately cancel the order, which pcb you advise me, that is tested and working. I thank you for the time you gave me.2019-07-19 at 16:44 #3136CraigGuest
I’m currently waiting for the PCB from Luc to arrive. I will let you know when I get a chance to test it out.2019-07-20 at 11:43 #3144Theo BostersGuest
i checked the board that i made as a final, its correct that this is a wrong layout, if its corect there must be another board layout on this side.
i lost all the files that was made with easyeda, but i found 2 picture from the latest board i made and tested, this board is working but you must be sure that you have the same 3,5 mm stereo jack ( in the original design the contacts don’t match, so switch them if needed).
I also found a short test movie where you can see that the board is working
front view of the board https://www.flickr.com/photos/panchozya/48329013301/in/dateposted-public/
and the back https://www.flickr.com/photos/panchozya/48329143652/in/dateposted-public/
Note: this was before the updat from martyn with the other flashes but if he has the updat corect then the other flashes must also working (not tested by me)