Flash pulse

Forums Forum Flash pulse

This topic contains 2 replies, has 2 voices, and was last updated by  Manish 3 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #2323 Reply

    Manish

    Hi

    I have tried with different pulse setting for flash like 50 and 100 etc but there is no change in image exposure. amount of Light remains the same. what impact is expected when we change flash pulse value?

    #2325 Reply

    Martyn
    Keymaster

    The flash trigger pulse time is the time the flash trigger signal is active. It is not the flash pulse. This is available to allow for old cameras. When I first started developing the dropController the camera I was using required a fairly long trigger pule to activate the shutter. Since I added the facility for the camera I also added it for the flash.

    The flash pulse has to be set manually on your flash; 1/32, 1/64, 1/128, etc. The longer the flash pulse (smaller numbers) the more light you get but you also get more movement in the water and so you also get more blur.

    #2353 Reply

    Manish

    Sure. Thank you for clarification

Viewing 3 posts - 1 through 3 (of 3 total)
Reply To: Flash pulse
Your information: