Error compiling for board

Forums General Questions and Comments Error compiling for board

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #2205 Reply
    Pat Crosby
    Guest

    I am in the process of building a one valve controller but the problem I am having at the moment (I’m sure there’s more to come) is that the sketch wont compile. It’s stopping with erroe “Error compiling for board arduino nano”.
    This is my first go at arduino so be gentle. I have tried blink and fade and they worked ok so the board is working ok.
    Any help appreciated.

    #2206 Reply
    Pat Crosby
    Guest

    Sorry, I was a bit premature in posting, I had’nt installed the digitalIOPerformance library. Its all ok now. Maybe this might help someone with the same issue. Thanks for your hard work.

Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: Error compiling for board
Your information: