camera trigger issue

Forums General Questions camera trigger issue

This topic contains 3 replies, has 1 voice, and was last updated by  Martyn 9 months, 3 weeks ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #2610 Reply

    Will

    OK, so everything works, except the camera does not trigger. I am getting the pulse signal to both optical triggers on the drop board side. -leds with power and resistor flashes-, but on the camera side, i get nothing. I am using the 4N25 by the way. I have double checked and triple checked the cables, and everything else i can think of.

    #2611 Reply

    Will

    when i say nothing, i should clarify, the led stay lit on the camera side, no pulsing. its been a long day.

    #2612 Reply

    Will

    Chips were in upside down….long day…long day. all seems fine now.

    #2613 Reply

    Martyn

    Glad you got it sorted. Also glad I’m not the only one. I can spend hours trouble shooting a simple mistake unable to see it.

Viewing 4 posts - 1 through 4 (of 4 total)
Reply To: camera trigger issue
Your information: