camera trigger issue

Forums General Questions and Comments camera trigger issue

Viewing 3 reply threads
  • Author
    Posts
    • #2610 Reply
      Will
      Guest

      OK, so everything works, except the camera does not trigger. I am getting the pulse signal to both optical triggers on the drop board side. -leds with power and resistor flashes-, but on the camera side, i get nothing. I am using the 4N25 by the way. I have double checked and triple checked the cables, and everything else i can think of.

    • #2611 Reply
      Will
      Guest

      when i say nothing, i should clarify, the led stay lit on the camera side, no pulsing. its been a long day.

    • #2612 Reply
      Will
      Guest

      Chips were in upside down….long day…long day. all seems fine now.

    • #2613 Reply
      Martyn
      Guest

      Glad you got it sorted. Also glad I’m not the only one. I can spend hours trouble shooting a simple mistake unable to see it.

Viewing 3 reply threads
Reply To: Reply #2612 in camera trigger issue
Your information:




Cancel